SYNERGY™
GLAZED CERAMIC
Description
Synergy™ combines texture with a hint of luminescence. This large format glazed ceramic tile provides a three dimensional effect with a contemporary and clean plaster look to a subtly shimmering chevron pattern. Synergy™ has a look for any application.
3 Colors | 2 Patterns | 1 Size
Technical Specifications
| Nominal Size (in.) | 16" x 47" |
| Edge Detail | Pressed |
| Finish | Satin |
| Faces | 3 (Plaster); 1 (Chevron) |
| Thickness (mm.)* | 10.9 |
| Lbs/PC | TIP |
| Grout Joint Recommendation (in.) | 3/16" |
* Tile thickness could vary based on size. Larger format tiles will have a higher thickness.
Testing
| Method | Results |
| Abrasion Resistance C1027 | TIP |
| Breaking Strength C648 | >225 |
| Chemical Resistance C650 | Resistant |
| Water Absorption C373 | <18.0% |
| DCOF AcuTest WET | TIP |
| Freeze-Thaw Cycling C1026 | TIP |
| Scratch Hardness MOHS | TIP |
| Shade Variation: Chevron | V1 |
| Shade Variation: Plaster | V1 |
| Pre-Consumer Recycled Content | 0% |
| Post-Consumer Recycled Content | 0% |
| VOC | None |
Download and View Care and Maintenance
- Tile thickness could vary based on size.
- Larger format tiles will have a higher thickness.
Sizes and Trim
16" x 47"

Usage
| USAGE TYPES: | YES/NO |
| COMMERCIAL FLOOR* | NO |
| RESIDENTIAL FLOOR | NO |
| RESIDENTIAL AND COMMERCIAL WALL | YES |
| SHOWER WALL | YES |
| SHOWER FLOOR | NO |
| STEAM SHOWER | NO |
| KITCHEN COUNTER | NO |
| STOVE AREA | YES |
| FIREPLACE FACADE | YES |
| COVERED EXTERIOR WALL FREEZING CLIMATES | NO |
| COVERED EXTERIOR WALL NON-FREEZING CLIMATES | NO |
| UNCOVERED EXTERIOR WALL FREEZING CLIMATES | NO |
| UNCOVERED EXTERIOR WALL NON-FREEZING CLIMATES | NO |
| COVERED EXTERIOR FLOOR FREEZING CLIMATES | NO |
| COVERED EXTERIOR FLOOR NON-FREEZING CLIMATES | NO |
| UNCOVERED EXTERIOR FLOOR FREEZING CLIMATES | NO |
| UNCOVERED EXTERIOR FLOOR NON-FREEZING CLIMATES | NO |
| POOL DECK | NO |
| POOL WATERLINE | NO |
| INSIDE POOL | NO |
| SPA / HOT TUB | NO |
| UV/ SUN EXPOSURE STABLE | YES |
* Emser recommends a .50 or greater DCOF for Commercial Dining Floors.
The usage chart is provided as a general guide only. Actual job site conditions may change a product’s suitability for a specific application. If special conditions apply, please contact an Emser representative for clarification of use prior to purchasing.

